Ring Binders & Tabs
Specialty Packaging
Presentations
Wire & Plastic Binding
Laminating Equipment
Supplies & Service

Our Word Is Binding Since 1946
5844 S. 194th St.
Kent, WA 98032
Phone (206) 443-9424    FAX (206) 443-1018
E-mail: binditup@binderproducts.com


Coil Binding Equipment


CoilMac-M
Manual Punch and Coil Inserter

Akiles CoilMac renders efficiency and productivity. Its high quality components and full range of functions make it the most complete and durable equipment in its class, ideal for higher volume binderies and copy centers.


CoilMac–ECI
Manual Punch and Electric Coil Inserter

With the most complete system of functions and a built-in electric coil inserter, the Akiles CoilMac-ECI is in a class all to itself. The Akiles CoilMac-ECI makes coil binding fast, easy and professional, making it the ideal partner for larger volume workloads.


CoilMac-EPI
Heavy Duty Electric Coil Punch & Inserter

With its heavy duty punch motor, built-in electric coil inserter and complete system of functions, Akiles CoilMac-EPI makes coil binding fast, easy, convenient and professional, making it the ideal partner for commercial volume workloads.


CoilMac-ECI Plus

OVAL holes: Special 4 x 5mm oval holes. The first & only equipment of its class to offer this advanced feature. Makes coil insertion much faster as compared to standard round holes. When used together with our HD Electric Coil Inserter, it will drastically save your coil insertion time by up to 50%.

FULLY Disengageable Pins: For a completely clean & professional punching of any paper size, all 54 pins can be independently pulled & disengaged.

LETTER 4:1 pitch (0.248"): This revolutionary 0.248” coil pitch is specifically designed to give you 44 evenly-centered holes in an 11” sheet, which provides the most ideal hole to edge-of-sheet margins and easier coil insertion. Hole pattern is 100% compatible with STANDARD 4:1 pitch coils.


CoilMac-EPI Plus

OVAL holes: Special 4 x 5mm oval holes. The first & only equipment of its class to offer this advanced feature. Makes coil insertion much faster as compared to standard round holes. When used together with our HD Electric Coil Inserter, it will drastically save your coil insertion time by up to 50%.

FULLY Disengageable Pins: For a completely clean & professional punching of any paper size, all 54 pins can be independently pulled & disengaged.

LETTER 4:1 pitch (0.248”): This revolutionary 0.248” coil pitch is specifically designed to give you 44 evenly-centered holes in an 11” sheet, which provides the most ideal hole to edge-of-sheet margins and easier coil insertion. Hole pattern is 100% compatible with STANDARD 4:1 pitch coils.

 
AlphaCoil-E
Electric Coil Binding System

The Akiles AlphaCoil-E is an all-in-one electric binding machine which allows you to produce professionally bound books with speed and ease. It has all the features you need for coil binding, in one convenient package.

 

3250CL Electric Coil & Spiral Binding Machine

Simple to use for today’s professional office – the 3250CL spiral binding machine turns loose pages into impressive looking documents. Compatible with nearly all brands of coil bindings. Binds with best results books using up to 15 mm (5/8 inch) coil size, or about 100 sheet documents.


OD-4012

The OD-4012 accepts 7 HD style interchangeable binding modules for flexible space saving and punch & bind combinations. It has the E-Z Change Die System, and comes with both a manual and an auto-reversing feature that prevents jams. The OD 4012 uses 11" (A4) size dies with open sides for wider sheet punching capability. OD 4800 & OD 4000 dies and modules work on the OD 4012, adding additional useful life to existing equipment. It has easy "Paper to Pin" sight alignment, for balanced hole to edge margins on odd-sized applications and features our unique Punch Registration System that assures accurate margins on an 11" (A4) sheet regardless of which die is used. Punching capacity rated at 25 sheets of 20 lb bond, equal to 50 pages front and back on any hole pattern.


HD 6500

  • Patented anti-jam feature. our new over-load detection feature triggers a auto-reversing function to eliminate jamming in the punch.
  • 2-bolt EZ Change slide out die system.
  • The HD 6500 has 12 different interchangeable dies available. (comes with your choice of a standard die).
  • 14" open ended punching, allows for wider applications.
  • Pre-set paper stop guide for easy setup.
  • All punch pins easily disengaged.
  • Easy, "paper to pin" sight alignment, for balanced hole to edge margins on odd-sized applications.
  • Smooth, quiet, power on demand operation.
  • Use foot pedal, side guide micro switch , or palm activation switch.
  • All metal fabrication.
  • Includes commercial chip tray.

HD–7000

The HD-7000 is a 14 inch (356 mm) open-ended punch that features the patented "quick change" die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The 7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a full year's warranty on both machine and the dies, this is truly the industry standard. You need look no further for the best.

Punching capacity depends on the punch pattern being used. Rated at 25 to 40 sheets or up to 80 pages of 20 pound bond paper (80 gsm). (15,000 - 18,000 sheets/hour).


HD 7700 Ultima

  • 4 " ( 356mm ) open ended extra capacity die:
    Punch up to 55 sheets of 11 inch, 20 pound bond paper.
  • U-View waste tray:
    Holds up to 150% more waste than any other table top punch & eliminates troublesome overfills.
  • The Accu-Set Paper Stop:
    Set-up all hole placements easily & accurately, even on odd sized paper.
  • Diagnostic Display Lights:
    Give indications of important machine conditions.
  • Built in Automatic and Manual Reverse:
    Providing extra insurance to eliminate costly down time & expensive service calls due to overload jams.
With these new features plus all of the standard features you have come to expect from a Rhino, this Performance Design Punch will handle any size project, large or small. Additionally, when your volume dictates, the HD-7700 can be upgraded later to a fully automatic punch.

As with all Rhin-O-Tuff's the HD-7700 comes with a 1 year limited warranty on both machine & die.


APES-14

Make your HD7000 Punch twice as productive by getting the new APES-14. APES stands for Automatic Paper Ejector & Stacker module. It punches, ejects and stacks in one continuous operation. The APES-14 easily attaches to your HD 7000 and handles paper sizes from 5.5" X 5.5" up to 14" X 14" (140 X 140mm to 356 X 356mm). For the occasional job that it can’t handle you can use your HD Punch in standard mode while the APES-14 is still attached.


PAL-14

Just add it to your existing Rhin-O-Tuff punching system. Exciting! Revolutionary! Innovative! Terms that are once again being used to describe a new Rhin-O-Tuff product.

Attachable to any OD Series or HD Series Rhin-O-Tuff punch, the Piks-A-Lift will forever change the way your customers look at our competitors automatic punching systems. When used in combination with our APES-14 module, "hands on" punching control virtually eliminates mis-punched sheets, thereby allowing the numbered page jobs usually excluded from automatic punching. The Piks-A-Lift / APES-14 combo has outperformed many of the fully automatic punches and has done so at less than one-half of their initial cost. The system offers flexibility enough to handle index tabs, clear covers, over-sized covers and paper sizes from 8.5" X 5.5" (140mm X 140mm) up to 8.5" X 14" (356mm x 356mm), both in landscape and portrait. Easy to set up and operate, your customers will appreciate the unbelievable productivity gains attainable with this new module.


HD 4170

The HD 4170 "Rhin-O-Roll" Coil Inserter Module has 12" dual powered adjustable rollers for easier more accurate coil insertion. It has gauges for book thickness and coil sizing. The HD 4170 can be used as a stand-alone production coil inserter or it can be attached on any OD or HD Series machine. All pitches and diameters can be inserted using it. The HD 4170 comes with a crimper pliers holder.


Roll‑@‑Coil
Makes coil inserting fast, effective and easy.

  • Diameter Scale: Helps to verify the coil diameter.
  • Diameter Selector: To best select the correct coil diameter size to the corresponding thickness of the document.
  • Alignment Channel: Aides in conforming the spine of larger documents to the coil shape, for a faster and easier insertion.
  • Electric Roller Inserter (Foot pedal operated): Allows the free use of both hands and grants the operator complete rotating control of the roller. Drastically reduces time and costs by making the inserting surprisingly fast and easy.
  • Pitch Identifier: Verifies that the coil pitch matches that of the punched document.

Finish@Coil E1
ELECTRIC COIL INSERTER with Built-In ELECTRIC CRIMPER

Finish@Coil E1 is one of the most easy-to-use coil finisher that you can find in the market today. It is designed with one goal in mind… providing the maximum productivity & best results while requiring minimum efforts from the operator.

With its adjustable full-size rollers, this high-capacity electric coil inserter makes coil inserting extremely fast and easy, even on the extra-large diameter sizes.

Furthermore, the built-in electric coil crimper will make your coil binding experience easier and faster than ever. Forget about using the cumbersome manual coil crimper that tires your wrist. With the Finish@Coil E1, you will easily & quickly crimp off the excess coil in your book with a simple press of foot pedal.

The Akiles Finish@Coil E1 is ideal for operators that demand maximum productivity & best binding results, with minimum efforts. It is a must for all binding centers with larg

Finish@Coil M
ELECTRIC COIL INSERTER & MANUAL CRIMPERS

With its adjustable full-size rollers, this heavy-duty electric coil inserter makes coil inserting surprisingly fast and easy, even on the extra-large diameter sizes. The Akiles Finish@Coil M is ideal for operators that demand versatility & productivity… And a must for all binding centers with large workloads.

Crimp@Coil
Electric Double-Sided Coil Crimpers
[NEW PRODUCT!]

Speed up your coil binding process with this time saver! Akiles Crimp@Coil is an easy to use electric coil crimper that cuts & crimps a both side of the coil at the same time, preventing it from rolling back out of the holes of your document.

Akiles Crimp@Coil's unique design accommodates all coil sizes from 6mm - 50mm, without the hassle of interchanging any parts. Its simple 5-Step setup only takes the operator seconds to change coil or sheet size settings.

Akiles Crimp@Coil is the ideal choice for high-volume binding facilities, as well as anyone who wants to avoid using manual crimping pliers during the coil binding process. Save time and money by ordering your Akiles Crimp@Coil today!

Many Other Models Available
We Service What We Sell
 
Back to Home Page